Hamed Soleymani - Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran
Reza Yegani - Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran
Mahboobeh Shahabi - Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran

Microporous polyvinylidene fluoride (PVDF) membranes were fabricated using the non-solvent induced phase separation (NIPS) method. N-methyl-2-pyrrolidone (NMP) as well as N,N-dimethylformamide (DMF) were used as solvents. Lithium Chloride (LiCl), ethanol and water were used as the inorganic salt additive, non-solvent additive and coagulation medium, respectively.Effect of each parameters on the morphology of pVDFmembranes were determined experimentally by using the Taguchi experimental design. The resulted membranes were characterized in using porosity and mechanical strenght measurement. The molecular structures of the prepared membranes were examined using a scanning electron microscope(SEM). Obtained results showed that the polymer and salt additive concentrations play a main role on the structural consideration and operational performance of fabricated membranes.

pvdf,non-solvent induced phase separation NIPS,flat plate membrane ,hollow fiber membrane ,taguchi experimental design method