CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

گواهی نمایه سازی مقاله Modelling and simulation of Continuous Catalytic Regeneration (CCR) Process

عنوان مقاله: Modelling and simulation of Continuous Catalytic Regeneration (CCR) Process
شناسه (COI) مقاله: ICHEC07_235
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال ۱۳۹۰
مشخصات نویسندگان مقاله:

Majid Sa'idi - Oil and Gas Processing Centre of Excellence, School of Chemical Engineering, College of Engineering,University of Tehran
Navid Mostoufi - Oil and Gas Processing Centre of Excellence, School of Chemical Engineering, College of Engineering,University of Tehran
Rahmat Sotudeh-Gharebagh - Oil and Gas Processing Centre of Excellence, School of Chemical Engineering, College of Engineering,University of Tehran

خلاصه مقاله:
Continuous catalytic regeneration (CCR) is one of the key processes in petroleum refineries for octane improvement and production of aromatic feedstock for petrochemical industries. Typical CCR reforming processes consist of three to four reactors with recycle. The reaction patterns andreactors have been mathematically modelled by using MATLAB software. The process model isbased on a 12-lumped kinetics reaction network and has been proved to be quite effective in termsof an industrial application. The naphtha is based on 25-lumped pseudo components including C6to C9 hydrocarbons in three categories of paraffin, naphtha, and aromatics. Simulation and modelling with process constraints is noticeable and has profitable applications for kinetic model to improve the process performance and maximize unit profitability. The simulation and modelling results of the model which have been validated for industrial CCR process will be presented.

کلمات کلیدی:
Simulation, Modelling, Naphtha reforming, Kinetic model

صفحه اختصاصی مقاله و دریافت فایل کامل: https://www.civilica.com/Paper-ICHEC07-ICHEC07_235.html