CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

گواهی نمایه سازی مقاله TemperatureEffects onSupercritical Miscible CO2-EOR

عنوان مقاله: TemperatureEffects onSupercritical Miscible CO2-EOR
شناسه (COI) مقاله: IPEC03_151
منتشر شده در سومین کنگره ملی مهندسی نفت در سال ۱۳۹۰
مشخصات نویسندگان مقاله:

a Zolghadr - EOR Research Center, School of Chemical and Petroleum Engineering, Shiraz University, P.O. Box 71345-1719, Shiraz, Iran
m Escrochi - EOR Research Center, School of Chemical and Petroleum Engineering, Shiraz University, P.O. Box 71345-1719, Shiraz, Iran
Sh. Ayatollahi - EOR Research Center, School of Chemical and Petroleum Engineering, Shiraz University, P.O. Box 71345-1719, Shiraz, Iran

خلاصه مقاله:
Minimum miscibility pressure (MMP) is one the most important parameters in the design of miscible gas and solvent injection enhanced oil recovery (EOR)projects.Various theoretical methods but few experimental methods are available for confidently determining the MMP at reservoir conditions.The presentexperimental study presents the application of a relatively new MMP determination technique namely vanishing interfacial tension method (VIT) ininvestigation of the effect of temperature on miscibility of gas oil and supercritical CO2. VIT technique relies on the measurements of gas/oilinterfacial tension (IFT) at several pressures and constant temperature.Besides, the density of the liquid and the dense gasat pressure and temperaturerange ofthe experiments was experimentally determined. The results clearly indicated that the MMP increases with temperature, however, the gradient of MMP increase is decreased with the temperature. The change of slop in interfacial tension data at high pressure is related to the difference between MMP and FCM, which are both accurately measurable with the VIT technique.

کلمات کلیدی:
CO2EOR; Miscibility; Interfacial tension; VIT technique;Density

صفحه اختصاصی مقاله و دریافت فایل کامل: https://www.civilica.com/Paper-IPEC03-IPEC03_151.html