CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

گواهی نمایه سازی مقاله Sand production control by four methods

عنوان مقاله: Sand production control by four methods
شناسه (COI) مقاله: NCCEESLAMSHAR01_019
منتشر شده در همایش ملی مهندسی شیمی در سال ۱۳۸۸
مشخصات نویسندگان مقاله:

Arash Dehgani - Chemical and Petroleum Engineering Department Shiraz University, Shiraz – Iran
Heidar Abbasi - Payam noor university of Khormuj, Iran
Dariush Mowla - Chemical and Petroleum Engineering Department Shiraz University, Shiraz – Iran

خلاصه مقاله:
Difficulties arising due to sand migration during oil production from oil wells, lead to propose some methods for controlling sand migration near the well. Several techniques have been used for sand production control in sandstone reservoirs. In this research, the sand obtained from oil tanks was cemented by four different methods, and in each method the samples of cemented sand were prepared for conducting experiments. For performing sand consolidation experiments, resin was used in three methods and in-situ combustion was used in one method. After making the samples in these methods and conducting the experiments of permeability, porosity and compressive strength, it is observed that these given methods provide reasonable and significant results.

کلمات کلیدی:
compressive strength, in-situ combustion, resin, sand production, permeability,porosity

صفحه اختصاصی مقاله و دریافت فایل کامل: http://www.civilica.com/Paper-NCCEESLAMSHAR01-NCCEESLAMSHAR01_019.html