CFD and Experimental Studies on Cone Cap Tray Hydrodynamics
عنوان مقاله: CFD and Experimental Studies on Cone Cap Tray Hydrodynamics
شناسه ملی مقاله: ICHEC07_273
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال 1390
شناسه ملی مقاله: ICHEC07_273
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال 1390
مشخصات نویسندگان مقاله:
Mohammed Rahim Ostadzehi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Rahbar Rahimi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Babak Jamshidi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Taleb Zarei - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,P.OBox.۹۸۱۶۴-۱۶۱, Iran
خلاصه مقاله:
Mohammed Rahim Ostadzehi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Rahbar Rahimi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Babak Jamshidi - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,
Taleb Zarei - Chemical Engineering Department, University of Sistan and Baluchestan, Zahedan,P.OBox.۹۸۱۶۴-۱۶۱, Iran
This paper describes an experimental and CFD investigation into the hydrodynamic behavior of a new type of column tray introduced as cone cap tray which may be used in contactor columns especially in stripping columns. The hydrodynamics of this plate is investigated in an Air-water commercial scale simulator column with an internal diameter of 1.2 m. The experiments and CFD simulation were performed on different operating conditions. The clear liquid height and total pressure drop were measured. The results were compared with valve tray in the same column simulator rig. The totalpressure drop and clear liquid height of cone cap tray are similar to a valve tray having equal open holes area
کلمات کلیدی: CFD, Cone Cap Tray, Valve Tray, Hydrodynamics, Pressure drop, Clear Liquid Height
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/341025/