CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

Investigation on effect of corona plasma treatment conditions on surface modification of polyethersulfone ultrafiltration membrane

عنوان مقاله: Investigation on effect of corona plasma treatment conditions on surface modification of polyethersulfone ultrafiltration membrane
شناسه ملی مقاله: ITCC02_485
منتشر شده در دومین کنفرانس بین المللی و سومین همایش ملی کاربرد فناوری های نوین در علوم مهندسی در سال 1394
مشخصات نویسندگان مقاله:

Zahra Tavana Valizadeh - Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Ahmadreza Raisi - Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran- Food Process Engineering and Biothechnology Research Center, A Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Abdolreza Aroujalian - Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran- Food Process Engineering and Biothechnology Research Center, A Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran

خلاصه مقاله:
Membrane surface modification is a useful technique to improve the separation performance and reduce the fouling tendency of the polymeric membranes. The main goal of this work is to modify the surface of polyethersulfone (PES) ultrafiltration (UF) membrane by corona air plasma treatment as a cold plasma technique. For this purpose, the PES UF membranes were prepared by the non-solvent-induced phase inversion method using water as non-solvent and then the surface of the prepared membranes were modified by the corona air plasma. The influence of corona input power (180, 270 and 360 W) and corona exposure time (2, 4 and 6 min) on the membrane surface properties was investigated. The modified membranes were characterized by the SEM, AFM and contact angle analysis as well as the pure water UF permeation and swelling tests. The results indicated that the surface porosity of the PES membrane enhanced by the corona surface modification. It was observed that at constant corona treatment time, the surface roughness of the membranes increased when the corona input power varied from 180 to 360 W. Furthermore, an increase in the corona power and exposure time resulted in higher hydrophilicity of the membrane surface. The pure water flux of the unmodified PES membrane and the membrane treated at 360 W for 6 min was 6.78 and 18.8 kg/m2h, respectively.

کلمات کلیدی:
Surface modification; Polyethersulfone (PES); Ultrafiltration (UF); Corona plasma

صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/502112/