Steel Building Lateral Behavior under Different Bracing Configurations and Arrangements: A Numerical Study
محل انتشار: ششمین همایش بین المللی مهندسی سازه
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 178
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISSEE06_017
تاریخ نمایه سازی: 16 بهمن 1401
چکیده مقاله:
Severe lateral displacement can significantly contribute to the formation of fractures, resulting in structural damage. Damage to the structure will reduce its performance. Taller buildings, such as high-rise buildings, display more significant lateral displacement. Structural bracing is a popular method for reducing lateral movement. It increases the structure's rigidity and stability. Previous research has demonstrated that the arrangement of building bracings influences seismic behavior. However, seismic design regulations do not consider this fact. This research was divided into two portions. The first section modelled a ۲۰-story structure with four variations of X-shaped, Ʌ-shaped, V-shaped, and two-story X-braced. The stiffness and displacement of structures equipped with each of these bracing were then measured and compared. The bracing with the highest rigidity and lowest displacement was then chosen. The brace with the better acceptable behavior in the first portion was picked for the second part. These bracing were then put through nine distinct configurations. Finally, the best arrangement was chosen. The results demonstrate that the X-shaped brace is stiffer than the Ʌ-shaped, V-shaped, and two-story X braces, while the V-shaped brace is the least stiff. Furthermore, it was shown that placing braces in the middle of the plan yielded the most remarkable results when compared to the other arrangements.
کلیدواژه ها:
نویسندگان
S. Javad Vaziri
M.Sc. Student of Structural Engineering, Department of Civil Engineering, Semnan University, Semnan, Iran
Mohammadreza Mofidi
B.Sc. Student of Civil Engineering, Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Atefeh Soleymani
Ph.D. Candidate of Structural Engineering, Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Hashem Jahangir
Assistant Professor, Department of Civil Engineering, University of Birjand, Birjand, Iran
Mojtaba Khosravi Zadanbeh
M.Sc. in Structural Engineering, Department of Civil Engineering, University of Birjand, Birjand, Iran