Stress Corrosion Cracking Detection of Sensitized Stainless Steel ۳۰۴ in Chloride Media by Using Electrochemical Impedance Spectroscopy (EIS)
محل انتشار: مجله علوم و فن آوری نفت، دوره: 2، شماره: 1
سال انتشار: 1391
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 66
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPSTR-2-1_007
تاریخ نمایه سازی: 29 آذر 1402
چکیده مقاله:
Electrochemical impedance spectroscopy (EIS) was used to detect stress corrosion cracking (SCC) in stainless steel ۳۰۴ alloy exposed to an aqueous environment at ۱۲۰ °C. Stainless steel ۳۰۴ alloy as u-bend was tested in the solution that contains ۴۰ weight percent of magnesium chloride. U-bended samples were prepared according to ASTM G۳۰. EIS measurements were always performed simultaneously on u-bend samples under stress and non-stress conditions. The results indicate that changes in phase shift versus time could be related to the stress corrosion cracking process. Stress corrosion cracking is detectable at a frequency of ۲۳.۹۵ Hz. EIS measurement can be used for SCC monitoring in u-bend samples. Finally, analysis of the fracture surface by using metallographic and SEM techniques confirmed the EIS results.
کلیدواژه ها:
نویسندگان
J. Neshati
Corrosion Department, Research Institute of Petroleum Industry (RIPI)
B. Adib
Department of Chemistry, Islamic Azad University, North Tehran Branch
A. Sardashti
Department of Chemistry, Islamic Azad University, North Tehran Branch
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :