Experimental Investigation of Cylinder Wake Flow Control By a plate with different end geometry
محل انتشار: همایش یافته های نوین در هوافضا و علوم وابسته
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 632
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MAARS01_275
تاریخ نمایه سازی: 16 اسفند 1394
چکیده مقاله:
An experimental study was carried out on the wake of cylinder that a plate behind it and with the end different angles of the terminal is installed. The Reynolds number is 50000. At the end of the plate, blades with height equal 0.25 times the diameter of the cylinder and with angles are 45, 90 and with 135 degrees from horizontal are installed and cylinder diameter is equal to the length of plate. The plate effects on the variation of drag coefficient, mean velocity profiles, reduced velocity and half with, turbulence intensity and Strouhal number is investigated. The results showed that the drag coefficient for cylinder with the plate, Regardless of the end angle, is smaller than isolated cylinder. The drag coefficient of cylinder with plate with end angle equal 45 is smallest.
کلیدواژه ها:
نویسندگان
Amir Mamouri
Engineering Faculty, Eshragh Institute of higher Education, Bojnourd, Iran.
Vahid Barzanooni
Mechanical Division, Engineering Faculty, Hakim Sabzevari University, Sabzevar,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :