The Influence of Geometric Characteristics on The Performance of Steel Shear Wall
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 353
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ARCE-2-1_004
تاریخ نمایه سازی: 30 فروردین 1399
چکیده مقاله:
The aim of this study is to investigate the mutual effect of geometrical properties of steel shear walls on their performance. This study was numerically performed using ABAQUS finite element software for simulation. In this study the effect of the diameter of the openings to the steel shear wall height ratio and the hardeners angles have been studied nonlinearly. The results show that as a result of the opening of the sheet, the shear resistance decreases proportionally to the decrease in its cross-sectional plane, but on the other hand, it increases the steel plate shear wall ductility and the 8% diameter is the largest diameter of opening which has a good effect on shear wall performance and the presence of reinforcing elements such as hardener increases the hardness of the steel shear wall and in this case it shows that using cross hardeners has the most effect in absorbing the energy of steel shear wall.
کلیدواژه ها:
نویسندگان
Peyman Katal Mohseni
Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Iran
Amin Zahedi- Khameneh
Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Iran
Zahra Khodaverdlou
Iran University of Science and Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :