Flexural behavior of porous functionally graded plates using a novel higher order theory
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 51، شماره: 2
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 264
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-51-2_011
تاریخ نمایه سازی: 21 اردیبهشت 1400
چکیده مقاله:
In this paper, the flexural response of functionally graded plates with porosities is investigated using a novel higher order shear deformation theory, which considers the influence of thickness stretching. This theory fulfills the nullity conditions at the top and bottom of the plate for the transverse shear stresses, thus avoids the need of a shear correction factor. The effective material properties are computed through the rule of mixtures. The principle of virtual displacements is employed to derive the equilibrium equations. The Navier’s method is adopted to obtain the solutions in closed form for simply supported boundary conditions. The accuracy and consistency of the developed theory are established with numerical results of perfect and porous functionally graded plates available in the open literature. The dimensionless transverse displacements and stresses have been reported. The effect of even, uneven and logarithmically-uneven porosity distributions with different porosity volume fraction, gradation index, side-to thickness ratios and aspect ratios are studied. The numerical results show that, the increase of volume fraction of porosity increases the dimensionless transverse deflections and axial stresses, and decreases the transverse shear stresses. No variation of transverse shear stresses observed for a completely ceramic and metallic plate for all kinds of porosity models. The provided numerical results can be used to evaluate various plate theories and also to compare the results of other analytical methods and finite element methods.
کلیدواژه ها:
نویسندگان
Sidda Bathini
Rajeev Gandhi Memorial College of Engineering & Technology, Nandyal,, Kurnool, A.P, India
K. Vijaya Kumar Reddy
Jawaharlal Nehru Technological Univeristy, Hydeerabad, Telangana, India.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :