Identification of Size and Location of Bearing Damage via Deep Learning
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 163
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJRRS-4-1_009
تاریخ نمایه سازی: 23 اسفند 1400
چکیده مقاله:
Rotating machine is one of the most important machines used in various sectors. The most important unit is the rotating part and the shaft held by bearings. Most of the maintenance and repair cost of these machines is related to the replacement and service of bearings. Therefore, it is very important to identify the damaged bearings and determine the location of the damage. Different methods have been developed to monitor their condition, including recording and analyzing the vibration signals of bearings. So far, vibration-based methods have often been used to analyze them. Recently, the use of machine learning and deep learning techniques have been considered. Therefore, in this paper, a convolutional neural network is developed that directly receives the raw information recorded by vibration sensors as input and after analysis, a healthy bearing is detected from a defective one, the location and size of the damage are determined. In this research, the data set of Case Western Reserve University is used to validate the model and the results show that the proposed model has very high accuracy for analysis of samples.
کلیدواژه ها:
نویسندگان
Mohammad Ali Farsi
Aerospace Research Institute
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :