Performance improvement of textile wastewater treatment plant design by STOAT model simulation
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 80
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EHEM-9-3_002
تاریخ نمایه سازی: 9 مهر 1401
چکیده مقاله:
Background: To control pollution, wastewater treatment from textile plays an important role in treating wastewater to meet quality standards before it is discharged into the environment. Without properly treated wastewater from the textile industry, it contains organic and inorganic pollutants that cause environmental problems such as water pollution, loss of marine life, and soil and air pollution. The aim of this study was to design and simulate a textile sewage treatment plant.
Methods: This study was conducted by simulating the process and operation of a wastewater treatment plant using STOAT software. In addition, STOAT’s graphical and static data analysis models are efficient in removing multi-component pollutants from the textile industry.
Results: Some pollutant parameters prior to the design model are SS (۲۶۰ mg/L), DS (۳۶۰۰ mg/L), ammonia (۶۵ mg/L), BOD (۴۳۰ mg/L), nitrate (۳۵ mg/L), and DO (۱۲ mg/L). The wastewater of the simulation result of the sewage treatment plant model contained SS (۳.۳ mg/L), ammonia (۲۵ mg/L), BOD (۴ mg/L), nitrate (۶۱.۳ mg/L), and the removal percentage of TSS, BOD, and Ammonia was ۹۹.۷۵, ۹۹.۱, ۶۱.۳۳mg/L, respectively. Through the treatment process, Ammonia was oxidized and nitrification was processed rather than denitrification.
Conclusion: Using the stoat modeling software, wastewater treatment plant design is very effective in removing contaminants from textile wastewater by selecting specific parameters.
کلیدواژه ها:
نویسندگان
Desalegn Abdissa Akuma
Corresponding author: Environmental Engineering, Jimma Technology Institute, Jimma University, Jimma, Ethiopia
Ketema Beyecha Hundie
Process Engineering, Jimma Technology Institute, Jimma University, Jimma, Ethiopia
Tafere Aga Bullo
Process Engineering, Jimma Technology Institute, Jimma University, Jimma, Ethiopia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :