Effect of annealing on microstructure and corrosion properties of Admiralty brass alloy tube in 3.5% NaCl solution
محل انتشار: سومین کنفرانس بین المللی عملیات حرارتی مواد
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,205
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICMH03_050
تاریخ نمایه سازی: 21 تیر 1391
چکیده مقاله:
The microstructure and corrosion resistance of annealed Admiralty brass alloy tube were investigated using optical microscope, X-ray diffraction (XRD), DC polarization measurements and electrochemical impedance spectroscopy (EIS), respectively. The recrystallizations gradually increased with the increase of annealing temperature and holding time. As annealing temperature and holding time increase, corrosion potential (EC) increased while corrosion rate (iC) decreased at 3.5% NaCl solution. The impedance measurements have shown that the corrosion rate of the alloy decreases with the immersion time from 0 to 15 days. The SnO2 surface film and the Sn-rich phases were responsible for the corrosion resistance of annealed Admiralty brass alloy tube in 3.5 wt. % NaCl solution. It was found that the Admiralty brass alloy tube annealed at 780°C for 120 min exhibited favorable corrosion resistance
کلیدواژه ها:
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :