The Developing Prospect of Air-cooled Bainitic Steels

سال انتشار: 1384
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 47

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ISSIRAN-2-2_002

تاریخ نمایه سازی: 6 آبان 1402

چکیده مقاله:

The unique properties of air-cooled bainitic steels have been described. A series of Mn containing air-cooled bainitic steels invented by authors is presented in this paper: including low carbon granular bainitic steels, low carbon grain-boundary allotriomorphic ferrite/granular bainite duplex steels, medium and medium high carbon bainite/martensite duplex steel, and low carbon carbide free bainite/martensite duplex steels. The development of ultra-low carbon bainitic steels inChinais also introduced.

کلیدواژه ها:

نویسندگان

Hong-Sheng Fang

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

Qi Li

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

Zhi-Gang Yang

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

Bing-Zhe Bai

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

Dong-Yu Liu

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

Fu-Bao Yang

Department of Materials Science and Engineering, Tsinghua University, Beijing, China, ۱۰۰۰۸۴

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H. S. Fang, J. Wang and Z. Yang: Bainitic Transformation, ...
  • P. B. Pickering: Physical Metallurgy and the Design of Steels, ...
  • L. Yang, H. S. Fang and Z. Meng: Acta Metall. ...
  • K. R. Kinsman and H. I. Aaronson, Transformation and Hardenability ...
  • H. S. Fang, Y. K. Zheng, X. Y. Chen, R. ...
  • H. S. Fang, Y. K. Zheng, X. Y. Chen and ...
  • L. J. Habraken: Revue de Metallurgie, ۱۹۵۶, ۵۳, ۹۳۰ ...
  • H. S. Fang, B. Bai and X. Zheng : Acta, ...
  • P. L. Mangonon: Metall. Trans., ۹A (۱۹۷۶), ۱۳۸۹ ...
  • H. S. Fang and H. Deng: Mater. Mech.Eng., ۵(۱), (۱۹۸۱), ...
  • G. Hu and et al.: Metallography,ShanghaiPress of Sci. and Tech., ...
  • P. G. Xu, H. S. Fang and B. Z. Bai, ...
  • H. S. Fang and Y. Zheng, : HSLA Steels,Beijing: TMS, ...
  • S. I.Nishida: Failure Analysis in Engineering. Applications.. Butterworth: Heinemann Ltd, ...
  • W. Huang, H. S. Fang and et.: Trans. of Metal ...
  • W. Chu, S. Li, J. Xiao and et.: Acta Metallurgica ...
  • L. Yao and et.: Wide and Thick Steel Plate, ۸ ...
  • G. Zhou, X. He and et.: Iron and Steel, ۳۵ ...
  • C. Shang and X. He, Workshop on New Generation Steel, ...
  • C. Shang, S. Yang, X. Wang and X. He: J.UniversityofSci.and ...
  • نمایش کامل مراجع