Comparison of Vibration Amplitude in Isfahan Subway Due to Track Structure- An Experimental Study
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 61
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-16-3_003
تاریخ نمایه سازی: 8 آبان 1402
چکیده مقاله:
Increasing the stability of structures and reducing the maintenance cost of slab track superstructures compared to ballasted tracks are among the reasons for the tendency to use this category of superstructures in the railway industry. Vibration reduction methods can be divided into three categories, source, propagation path, and receiver. In general, the slab track structures in Iran are divided into three categories: direct fixation track (DFT), floating slab track (FST), and high resilient fastener (HRF). Although railway tracks are a safe, economical and fast transportation system and can lead to the strengthening of the tourism industry, in the long term, vibrations can damage many historical structures in the city of Isfahan. FST and HRF systems are used in the structure of Isfahan subway track. In this paper, the accelerations (longitudinal, lateral, and vertical) of the Isfahan subway vehicle were measured in ۳۰ stations (۱۵ go stations and ۱۵ return stations). The results showed that the HRF system compared to the FST has a significant effect in reducing the range of vibrations and ultimately the safety of the train and the ride comfort. For example, in the area between Si-O-Se-Pol and Imam Hossein Square, due to the track structure type (HRF), the maximum acceleration and RMS acceleration are in the range of ۱.۵ and ۰.۳ m/s۲, respectively, while in other stations these values were extracted up to ۴ and ۰.۷ m/s۲, respectively.
کلیدواژه ها:
نویسندگان
sajjad sattari
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
Mohammad Saadat
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
Sayed Hasan Mirtalaie
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
mahdi salehi
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
ali soleimani
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :