A Sampling Method based on System State Transition for Distribution System Adequacy Assessment using Distributed Generation
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 66
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JOAPE-11-4_003
تاریخ نمایه سازی: 13 آبان 1402
چکیده مقاله:
A sampling method is proposed related to-system state transition based Monte Carlo simulation (SSTMCS) for the adequacy assessment in the radial distribution system (RDS) in the presence of distributed generation (DG) termed as a composite distribution system (CDS). This method evaluates well-being indices such as probabilities, frequency, and duration indices in healthy, marginal, and risky states. A deterministic criterion is used for adequacy assessment. Samples are generated using a load flow program for RDS used in SSTMCS. The loss sensitivity factor is utilized for the positioning of DGs in RDS. DG capacity and load at buses are considered continuous random variables. Different cases are addressed to demonstrate the impact of varying DG capacities on well-being indices. Moreover, the results are compared with the state enumeration method (SEM). IEEE-۳۳ bus RDS is considered for this study.
کلیدواژه ها:
ژنراتور توزیع شده (DG) ، ضریب حساسیت تلفات (LSF) ، شبیه سازی مونت کارلو مبتنی بر انتقال حالت سیستم (SSTMCS) ، سیستم توزیع شعاعی (RDS) ، روش شمارش حالت (SEM)
نویسندگان
S.S. Halve
Department of Electrical Engineering, Medi-Caps University, Indore, India
A. Koshti
Gokhale Education Society R.H.Sapat COEMS\&R, Nashik, India
R. Arya
Medi-Caps Univeristy, Indore, India
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :