Damage detection and model updating wall 3D panel structures
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 822
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICSAU02_0587
تاریخ نمایه سازی: 16 خرداد 1394
چکیده مقاله:
Detection of damage in engineering structures during their service life has received increasing attention from researchers in the last years. Exact structural damage detection is a challenging problem due to the nonlinear behavior of structures, incomplete sensed data and presence of noise in the data. Information on the location and extent of damages could assist in the diagnosis of the structural health conditions. In current study, modal tests were implemented for 3 wall sandwich panels and subsequent frequency results and mode shapes were recorded for two undamaged and damaged states. Then, their correlation with MAC (Modal Assurance Criteria) was investigated. Comparison of frequency and mode shapes indicates occurrence of damage in panels. Furthermore, amount of damage was calculated by modeling undamaged and damaged wall panels in finite element (FE) software and defining defect detection algorithms.
کلیدواژه ها:
نویسندگان
omid rezaee far
Assistant Professer of Civil Engineer Departman, semnan university
saman sarkhosh
M.Sc Civil Engineer, semnan university
mohsen talebi kojidi
M.Sc Civil Engineer, semnan university