Olefins Production Methanol To Propylene
محل انتشار: هشتمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1382
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 5,021
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC08_365
تاریخ نمایه سازی: 8 اسفند 1386
چکیده مقاله:
Olefins (ethylene and propylene) are the main building stones for plastics. They can be produced using several processes and feedstocks. For most processes, ethylene is the main output product, followed at a distance by propylene. There are five major processes for producing of olefins; Steam cracking; Olefins recovery from FCC off gasses; Oxidative coupling of natural gas; Biomass (flash) pyrolysis and finally Methanol to olefin(MTO). During the last decade, the demand for propylene has grown rapidly, as an effect of the growing demand for polypropylene. There are several processes for production of olefins via the methanol to olefins (MTO) such as Uop/Hydro, Lurgi and Exxon Mobil. The growing availability of natural gas has led to advances in technologies designed to capitalize on this low cost resources. With Lurgi Mega-Methanol and MTP technology, Lurgi Oel Gas Chemie commands the processes for a complete chain to obtain from natural gas a product with a high value added. Lurgi's Mega-Methanol technology allows the cost-effective production of methanol and the MTP process ensures the conversion of this product into high-grade propylene.
کلیدواژه ها:
نویسندگان
Gholam Reza Mardani
Engineering Institute Of Jahadekeshavarzi, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :