Overview of the Washington State Bridge Seismic Retrofit Program and Research Projects
محل انتشار: سومین کنفرانس بین المللی مقاوم سازی لرزه ای
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,470
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCT03_103
تاریخ نمایه سازی: 5 تیر 1389
چکیده مقاله:
This paper presents retrofit measures for improving the seismic performance of columns in Washington State. Tests on column specimens representing as-built conditions resulted in shear failures at modest displacement levels, accompanied by severe strength and stiffness degradation. Tests on column specimens retrofitted with FRP jacketing resulted in improved performance compared to that obtained for the as-built column specimens. It was found that the FRP jacket needs to be anchored in the reentrant corners of the cruciform-shaped columns to be effective. In addition, the FRP jacket does not provide adequate confinement to prevent flexural hinge degradation. The final retrofit design incorporating reentrant corner anchorage and groutfilled steel collars at the hinge regions produced a ductile flexural response.
نویسندگان
Bijan Khaleghi
State Bridge Design Engineer Washington State Department of Transportation Adjunct Professor, Saint Martin University Olympia, Washington
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :