Modeling and Simulation of ۶DOF Robot Manipulators with Tactile Position-Force Control
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 185
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-15-1_005
تاریخ نمایه سازی: 6 اردیبهشت 1401
چکیده مقاله:
In this paper, a joint position-force controller is used to control a ۶R general-purpose robot manipulator. The manipulator comes into interaction with a spherical object in a numerically simulated environment. A controller has been implemented using the MATLAB Simulink software which uses the Simmechanics second-generation toolbox. A useful numerical contact model is used for modelling the interaction between the manipulator’s end-effector and the environment which generates the interaction feedback forces. The control algorithm presented in this paper is developed in the Cartesian space and the original control algorithm was modified to satisfy the desired input position in the base coordinate frame. The control algorithm was verified using a virtual environment, before hardware implementation. The novelty of the controller is determining the input tactile forces for the robot without actually causing a collision between the end-effector and the object in the environment which can lead to fracture and damage to the environment or the manipulator. The modeling process of interaction with the spherical environment was investigated using Simmechanics to model precise mechanical characteristics of manipulator that are unknown to the designers and provide a great advantage in the simulation for them. The considered position and tactile force were tracked successfully with good accuracy. The results show that the proposed manipulator system controls the position and force with more than ۹۵% accuracy and the accuracy of desired tracing trajectory is ۹۹%.
کلیدواژه ها:
نویسندگان
Mohammad Reza Najafi
Department of Mechanical Engineering, Imam Hossein comprehensive University, Tehran, Iran
Ahmad Khoogar
Faculty of Material and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran
Hadi Darabi
Department of Mechanical Engineering, Imam Hossein comprehensive University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :