بررسی ریزساختار، سختی و ترکیبات بین فلزی جوشکاری اصطکاکی اغتشاشی ۱۰۵۰ Al و مس
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 81
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JWSTI-9-1_003
تاریخ نمایه سازی: 10 مرداد 1402
چکیده مقاله:
In this research, friction stir welding of aluminum ۱۰۵۰ to copper with variable speed was investigated. For friction stir welding, rotational speeds of ۹۰۰ and ۱۲۰۰ rpm and traverse speeds of ۳۶, ۶۳, and ۱۲۵ mm/min were used. In order to check the phases and microstructure, scanning electron microscope analysis, X-ray spectrometry, and hardness testing were used. The disturbance zone included Al۲Cu۳, Al۴Cu۹, AlCu۴, Al۲Cu, and AlCu phases. The results showed that the formation of intermetallic phases and severe plastic deformation in the welding area caused an increase in hardness. The highest hardness value in the stirred area was ۹۷.۸ Vickers at a rotation speed of ۹۰۰ rpm and an advance speed of ۳۶ mm/min.
کلیدواژه ها:
نویسندگان
میثم احمدی
Department of Mechanical Engineering, Kermanshah Branch, Islamic Azad University, Kermanshah.
حمید رضا احمدی
Materials Engineering, Saveh Branch, Islamic Azad University, Saveh.
محمد رضا خانزاده
Technical and Engineering Faculty, Mobarakeh Branch, Islamic Azad University, Mobarakeh, Isfahan.
حمید بختیاری
Materials and Energy Research Center, Ceramics Research Institute, Karaj.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :