Physical Modeling of Steel Delivery during Thin Slab Continuous Casting
سال انتشار: 1387
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 58
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-5-1_007
تاریخ نمایه سازی: 6 آبان 1402
چکیده مقاله:
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum operational parameters, experiments were carried out under different casting conditions. The results showed that the four-hole nozzle design leads to a special flow pattern. It was also shown that increased casting speed and gas injection both resulted in surface turbulence. In order to avoid surface turbulence and the related casting problems, it is recommended that SEN depths of ۳۰ and ۴۰ cm be used for casting speeds of ۳.۵ and ۴.۵ m/min, respectively.
کلیدواژه ها:
نویسندگان
M. Meratian
Department of Materials Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶-۸۳۱۱۱, Iran
A. Hadjari
Rayan Tahlil Co., Isfahan Science and Technology Town, Isfahan, ۸۴۱۵۵-۶۶۶, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :