Application of ET method for estimation of inelastic deformation demands of steel frames
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,782
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE08_481
تاریخ نمایه سازی: 28 آبان 1387
چکیده مقاله:
The accuracy of ET method in predicting the response of steel frames in nonlinear analysis is investigated by considering a simple set of MDOF steel frames. Elastic-Perfectly-Plastic material model has been assumed. Results computed with ET method are compared with the results of nonlinear response history analyses. It is shown that in most of the frames, estimations of ET analysis for maximum interstory drift ratio are less than nonlinear response history analysis results. The dispersion of the results of nonlinear response history analysis for the frames that experience more nonlinearity is high. The consistency of the base shears obtained by two methods is acceptable.
کلیدواژه ها:
Nonlinear response -history analysis ، Dynamic pushover ، Endurance Time method ، Performance-based seismic engineering
نویسندگان
Hossein Tajmir Riahi
PhD candidate, Sharif university of technology, Iran
Homayoon E. Estekanchi
Associate professor, Sharif university of technology, Iran