Influence of Bending Pushassist on subsequence Hydroforming of Aluminum Tubes
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,333
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_061
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
Aluminum tubes are important source components for manufacturing hollow bodies using hydroforming process. Production of parts with complex structures using tube materials often requires some operations prior to hydroforming. Bending is one of the typical forming processes to prepare tubes for actual hydroforming. It influences the mechanical properties of the tube material and causes a substantial reduction in formability in subsequent hydroforming [1, 2]. Furthermore, the non-uniformity of the wall thickness around the circumference of a bent tube affects also the uniformity of the thickness of the final product.
نویسندگان
Ghafoor Khodayari
Industrial Research and Development Institute(IRDI)۶۴۹ Prospect Blvd. P.O. Box ۵۱۸; Midland, Ontario,Canada N۲L ۳G۱
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :