FIBER ORIENTATION IN INJECTION MOLDING OF REINFORCED THERMOPLASTICS
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,314
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_068
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
Powders, flakes, and fibers are generally incorporated into plastic resins to selectively modify mechanical properties of the original resin. With fibrous fillers, the improvements can be further magnified due to the influence of the fiber aspect ratio and anisotropy as well as fiber orientation. The orientation of fibers can vary significantly across the thickness of injection-molded part and becomes a key feature of the finished product. Improving the mechanical properties of molded parts by managing the orientation of fibers during the process of injection molding is the basic motivation of this study. In this study analyzing the effect of pressure distribution on the state of fiber orientation after complete filling of the cavity is considered. The result reveals the importance of packing pressure in orienting the fibers.
کلیدواژه ها:
نویسندگان
Parvin Shokri
Research Scholar, Mech Engg Dept, IIT- Delhi (Industrial Design Group, Azzahra Univ., Vanak, Tehran, IRAN
Naresh Bhatnagar
Associate Professor, Mech Engg Dept, IIT- Delhi
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :