Impacts of Volume of Carbon Nanotubes on Bending for Carbon-Kevlar Hybrid Fabrics
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 112
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-7-2_040
تاریخ نمایه سازی: 9 خرداد 1400
چکیده مقاله:
Carbon nanotubes indicate mechanical properties ideally examined for reinforced Carbon/Kevlar hybrid fabrics in the intact specimens by SEM and EDX observations an Carbon nanotubes indicated mechanical properties that were examined for reinforced Carbon/Kevlar hybrid fabrics in the intact specimens by SEM and EDX observations and after attempting six successful ballistic impacts, at various targets’ angles: normal impact (۰-degree), ۱۰-degree, ۲۰-degree, ۳۰-degree, and ۴۰-degree) with the different volume of CNT% (۰, ۰.۱, ۰.۳, ۰.۵, ۰.۷, ۱, and ۱.۵) after attempting six successful ballistic impacts, at various targets’ angles: normal impact (۰-degree), ۱۰-degree, ۲۰-degree, ۳۰-degree, and ۴۰-degree) with the different volume of CNT% (۰, ۰.۱, ۰.۳, ۰.۵, ۰.۷, ۱, and ۱.۵). Each sample was fabricated by the same curing unit and then evaluated by the three‐point bending universal testing machine model (INSTRON-۳۳۶۹). Flexural Stress-Strain curves under ۳-points bending in CNT epoxy composite laminates calculated flexural modulus of elasticity and bending toughness at room temperature.
کلیدواژه ها:
نویسندگان
Elias Randjbaran
Department of Aerospace Engineering, Faculty of Engineering, Serdang, Selangor, ۴۳۴۰۰, Malaysia
Dayang L. Majid
Department of Aerospace Engineering, Faculty of Engineering, Serdang, Selangor, ۴۳۴۰۰, Malaysia
Rizal Zahari
Systems Engineering Department, Military Technological College, Ministry of Defence, Muscat, PO-Box ۲۶۲ PC ۱۱۱, Sultanate of Oman
Mohamed T. H. Sultan
Department of Aerospace Engineering, Faculty of Engineering, Serdang, Selangor, ۴۳۴۰۰, Malaysia
Norkhairunnisa Mazlan
Department of Aerospace Engineering, Faculty of Engineering, Serdang, Selangor, ۴۳۴۰۰, Malaysia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :