A New ۳D Model for Shear Wave Velocity by Utilizing Conventional Petrophysical Logs and Geostatistical Method
محل انتشار: مجله معدن و محیط زیست، دوره: 13، شماره: 2
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 84
فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-13-2_008
تاریخ نمایه سازی: 29 تیر 1401
چکیده مقاله:
Shear wave velocity (Vs) is considered as a key parameter in determination of the subsurface geomechanical properties in any hydrocarbon-bearing reservoir. During a well logging operation, the magnitude of Vs can be directly measured through the dipole shear sonic imager (DSI) logs. On a negative note, this method not only is limited to one dimensional (۱D) interpretation, it also appears to be relatively costly. In this research work, the magnitude of Vs is calculated using one set of controversial petrophysical logs (compressional wave velocity) for an oil reservoir situated in the south part of Iran. To do this, initially, the pertinent empirical correlations between the compressional (Vp) and shear wave velocities are extracted for DSI logs. Then those empirical correlations are deployed in order to calculate the values of Vs within a series of thirty wells, in which their Vp values are already recorded. Afterwards, the Kriging estimator along with the Back Propagation Neural Network (BPNN) technique are utilized to calculate the values of Vs throughout the whole reservoir. Eventually, the results obtained from the two aforementioned techniques are compared with each other. Comparing those results, it turns out that the Kriging estimation technique presents more accurate values of Vs than the BPNN technique. Hence, the supremacy of the Kriging estimation technique over the BPNN technique must be regarded to achieve a further reliable magnitude of Vs in the subjected oil field. This application can also be considered in any other oil field with similar geomechanical and geological circumstances.
کلیدواژه ها:
نویسندگان
Sh. Maleki
Faculty of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
H. R. Ramazi
Faculty of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
M. J. Ameri Shahrabi
Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :