Hexavalent Chromium Adsorption onto Fire Clay

Cr (VI) as an extremely soluble and highly toxic ion is present in effluents of industries and imposes severe health-related problems. The current study aimed to provide information on Cr (VI) adsorption potential of fire clay as an abundant, cost-effective and untried material. Batch adsorption trials of Cr (VI) were performed to investigate the effects of pH, contact time, initial metal ion concentration and the adsorbent dosage. Langmuir, Freundlich and Dubinin–Radushkevich isotherm models were used to evaluate the equilibrium data at ۲۰°C and regression coefficients were derived. Moreover, adsorption kinetics was analyzed using the pseudo-first-order and the pseudo-second-order kinetic models. Maximum chromium removal was found at pH ۲.۰. A kinetic study yielded an optimum equilibrium time of ۹۰ minutes with an adsorbent dose of ۲.۵ g/۵۰ mL. Results suggested that the equilibrium adsorption described by the Freundlich model. The kinetic data of the sorption showed that the pseudo second-order equation was the more appropriate. The results of the study indicated that fire clay was not a suitable adsorbent for Cr (IV). Apart from relatively long equilibrium time, the efficiency was not satisfactory. Therefore, searching for better alternative and/or modify such adsorbent is necessary in this area.