Investigation of Honeycomb Sandwich Panel Structure using Aluminum Alloy (AL۶XN) Material under Blast Loading

In this study, we focused on the large inelastic behavior of a sandwich panel made of two solid plates as a stiffener and a honeycomb core shell subjected to blast load. The loading scheme was carried out using an explosive charge bullet mounted at a standoff distance of ۱۰۰ mm with three mass variations of trinitrotoluene: ۱, ۲, and ۳ kg TNT. The numerical simulations performed using ABAQUS/CAE were validated with the experimental results of a previous study. The geometrical effects of the sandwich panel on intact and damaged models were also numerically investigated. The panel was designed using a square and hexagonal honeycomb core. The effect of honeycomb core height was also observed by modeling the core using three height variations: ۳۱, ۵۱, and ۷۱ mm. The results showed that the hexagonal core was more resistant to blast loads than the square design. The core height parameter determines the energy absorption based on these results. The structural strength is also affected by the damage. The findings of this study can be used to improve structural designs that utilize sandwich panels to withstand blast loads. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۲-۰۸-۰۵-۰۱۴ Full Text: PDF

کلیدواژه ها:

Blast Loads ، Deformation ، Honeycomb ، Trinitrotoluene ، ABAQUS/CAE.