Basis of Submarine Shape Design
محل انتشار: شانزدهمین همایش صنایع دریایی
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 627
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NSMI16_088
تاریخ نمایه سازی: 12 تیر 1395
چکیده مقاله:
This paper presents some of the basis and concepts of submarine shape design. Usually, there are some questions about the origins and reasonsof the selection of overall hydrodynamic shape, the diameter and length, the bow and stern shape. This paper uses CFD method for analysis of sixdifferent model of submarine. The resistance coefficients of each shape are presented and compared so that could understand the reason of submarine shape selection with tapered stern and curvedbow. The focus of this paper is on the cylindrical middle body submarine such as the most of navalsubmarines and ROVs. Determination of diameter and length of submarine is related to the L/D ratio that is somewhat discussed here by CFD modeling.The outlook of this paper is on the naval submarines, and some useful notes are presented in this field.The tools of CFD modeling is Flow Vision (v.2.3) software that is known as a skilled software in CFD modeling.
کلیدواژه ها:
نویسندگان
Mohammad Moonesun
National University of Shipbuilding Admiral Makarov (NUOS), Faculty of Ship Design, PhD student ,Ukraine and researcher in Maleke-Ashtar University of Technology
Yuri Mikhailovich Korol
National University of Shipbuilding Admiral Makarov (NUOS), Faculty of Ship Design, Professor in ship design, Ukraine
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :