Mechanically Activated Combustion Synthesis of Titanium Aluminide
محل انتشار: دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 418
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES10_116
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
Titanium aluminide compound was synthesized by the thermal explosion mode of selfpropagating high-temperature synthesis (SHS). Considering to ignition temperature of TiAlwhich was obtained about 800ºC, three different temperature and three activation times of initial powder mixture were chosen. The maximum combustion temperature was determined to be about65%, but it was not remarkably affected by the milling time. The time-to-ignition was found to behighly influenced by milling time. The products were characterized by X-ray diffraction and it was found out that the products were consisted of the TiAl phase with Ti3Al as second phase
کلیدواژه ها:
Self-propagating high-temperature synthesis (SHS) ، Intermetallics ، Titanium aluminide ، Mechanical activation
نویسندگان
Maryam Akhlaghi
PhD Student, Materials & Energy Research Center, Karaj. Materials & Energy Research Center, Karaj
Seyyed Ali Tayebifard
Assistant Professor, Materials & Energy Research Center, Karaj Materials & Energy Research Center, Karaj
Esmaeil Salahi
Associate Professor, Materials & Energy Research Center, Karaj Materials & Energy Research Center, Karaj
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :