Parametric Optimization of Shielding metal arc welding process by using Response Surface Methodology (RSM) and Gage R&R Methodology on stainless steel 37
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 386
فایل این مقاله در 14 صفحه با فرمت PDF و WORD قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISECONF01_085
تاریخ نمایه سازی: 7 اردیبهشت 1396
چکیده مقاله:
Shielded metal arc welding method was used for welding samples. In this study design of experiments, response surface method (RSM), Central composite design (CCD) is used for designing a four factor to construct a statistical model for accurate prediction of responses. The influence of parameters: preheat, electrode diameter, welding voltage and the sheet thickness on the tensile strength welded st37 steel were studied. Changes observed in the process is including the real change of process and changes of measurement system. Thus, to determine the real changes it is necessary the changes of measurement system, identifying and be separated from total changes. Therefore, in this study to get the amount of error due to the measurement system, the Gage R&R Methodology is used. The results of analysis of variance (ANOVA) indicated that electrode diameter with 72% influence on tensile strength of samples, is more effective than processing parameters.
نویسندگان
Hossein gheshlaghi gadim
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
Ali Doniavi
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :