EVALUATION OF MECHANCAL PROPERTIES OF AL/SO2 NANOCOMPOSTE SHEETS PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 509
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
UFGNSM03_224
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
Accumulative roll-bonding process (ARB) is the only severe plastic deformation (SPD) process using rolling deformation itself for the industrial production of ultrafine grained (UFG) sheets with higher mechanical properties. In the present study, The ARB process used for manufacturing Al/SiO, nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO, particles, up to 8 cycles at ambient temperature. The tensile strength and microhardness of produced nanocomposites were investigated in different cycles. The results show that by increasing ARB cycles and amount of nano powders, the tensile strength and hardness of the produced nanocomposites increases.
کلیدواژه ها:
Sever Plastic Deformation (SPD) process ، Accumulative Roll Bonding (ARB) ، Mechanical Properties ، Nanocomposite
نویسندگان
MAHDI KADKHODAEE
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz, Fars, Iran
HABIB DANESHMANESH
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran
BABAK HASHEMI
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran
JAVAD MORADGHOLI
Department of Materials Science and Engineering, School of Engineering, Shiraz University Zand St, Shiraz Fars, Iran