Evaluation of the tension in steel plate under combined loads
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 545
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICSAU04_0579
تاریخ نمایه سازی: 11 مرداد 1396
چکیده مقاله:
Strength of Materials Science Engineering is one of the oldest sciences. One of thebranches of this science is widely used fracture mechanics. Due to the extensiveprogress and extensive knowledge of Engineering Fracture Mechanics of particularinterest to researchers in the world. In this article we examine the tension in the steelplates. For this purpose, a steel sheet And put under the horizontal and verticaldisplacement of the tension steel sheets described above. In addition, by increasing theamount of displacement in horizontal and vertical direction to pay the amount of stresson the steel plate. The results showed an increase in tensions with the increased load, sothat no matter how The displacement increase to the same amount of stress increases.The results show that stress in the horizontal direction is greater than the stress in thehorizontal direction. In this study, the dimensions of the steel sheet is fixed.
کلیدواژه ها:
نویسندگان
Nabard Habibi
Assistant professor, Mechanical Engineering Department,University of Kurdistan, Sanandaj, Iran,P.O.Box۴۱۶
Mansour Farhadi
graduate student in Civil Engineering - Structural Engineering , University of Kurdistan, Sanandaj, Iran. Box۴۱۶
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :