Application of 3D FEM to Die Design in the Radial Forging Process
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,007
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_082
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
Radial forging is an open forging process used for reducing the diameters of shafts,tubes, stepped shafts and axels, as well as for creating internal profiles for tubes such as rifling the gun barrels. Most of previous studies conducted on the radial forging process have used axisymmetric models to investigate the effects of die shape on deformation. In order to design a hammer die for radial forging process, a full 3D model of the process is needed to consider the effects of die shape in the cross-section area on deformation. In this study, finite element method is used to model the radial forging process and to study the effects of die shape in the crosssection area on deformation.
کلیدواژه ها:
نویسندگان
A Ghaei
MSc Student, Mechanical Eng. Dept., Sharif University of Tech
M.R Movahhedy
Assistant Professor, Mechanical Eng. Dept., Sharif University of Tech
A Karimi Taheri
Professor, Materials Science and Eng. Dept., Sharif University of Tech
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :