OPTIMUM DESIGN OF A MINIMUM ORDER OBSERVER TO CONTROL BOILER SYSTEM PERFORMANCE
محل انتشار: پانزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,144
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_143
تاریخ نمایه سازی: 8 فروردین 1386
چکیده مقاله:
To achieve a good performance of a utility boiler system, dynamic variables such as steam pressure, steam temperature and water level of drum must be controlled. In this paper a LTI model of the boiler system is considered in which the input variables are feed-water flow rate, fuel flow rate and attemperator spray flow rate. However, the state of system is usually not available. So, a minimum- order observer is designed based upon Luenberger’s model to gain an estimate state of the true state x . Considering the observer on the closed- loop system, a regulator system is designed. Then, the desired observer poles are chosen such that a suitable time response specifications of the boiler system are achieved and the gain margin and phase margin of the system are adjusted in an acceptable range. Finally, using a MATLAB program, the robustness of the
system to the model uncertainties is guaranteed. If any variation occurs in the model, the optimum values of observer poles are chosen by this program automatically.
کلیدواژه ها:
نویسندگان
Golriz Kermani
Graduate Student, Amir Kabir University of Technology Tehran, Iran
Hamed Moradi
Graduate Student,Sharif University of Technology Tehran, Iran
Firooz Bakhtiarinejad
Professor, Amir Kabir University of Technology Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :